Pathway/XM System Management Manual

Configuring the Pathway/XM Environment
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
4-6
Checking Process Capacity
For cause, effect, and recovery information about the individual error and warning
messages that can appear in your PXMCFG listing, refer to Section 12, PXMCFG
Messages.
Checking Process Capacity
The PXMCFG utility cannot check the maximum number of processes per CPU in your
SYSGEN configuration. If you have configured a small number of processes per CPU
with SYSGEN, it is possible that PXMCFG could configure more than the allowed
number of processes.
Example 4-1. Sample PXMCFG Output Listing, Summary Portion
PATHWAY/XM CONFIGURATION SUMMARY
Total Systems = 1
Total NODE Objects = 2
Total PATHMON Objects = 1
Total Server Classes = 5
Total TCP Templates = 2
Total TCP Objects = 40
Total PROGRAM Objects = 1
Total ROUTER Objects = 3
Total TERM Objects = 45
Total PLAN Objects = 2
DETAILED PATHWAY/XM CONFIGURATION SUMMARY
System: \UK1
Client Node: CLIENT1 Cpus = (1:22, 3:31, 5:31, 6:8, 9:8)
PATHMON: PM0000
TCP: TCP0064 (TCP Template: TCP1 on Node: CLIENT1)
PROGRAM: PROG-1
TCP: TCP0001 (TCP Template: TCP1 on Node: CLIENT1)
TERM: TFRONT1
TERM: TFRONT2
...
.
.
Server Node: SERVER1 Cpus = (1:13, 2:30, 3:9, 4:18, 5:30)
SC: GUI-TELESERV
SC: GUI-TISERV
SC: SVR3
...
ROLLING CONFIGURATION PLAN SUMMARY
Plan: 22_UPDATE_NODES
Type: NODE
Action: Update
Objects:
TEST-NODE
TEST2-NODE
ZEST-NODE
Plan: 28_UPDATE_DISTRIBUTED_SERVERCLASSES
Type: SERVER, Sub-Type: DISTRIBUTED
Action: Update
Objects:
SC001
SC00198
SC00199