Pathway/XM System Management Manual

Configuration Limits and Defaults
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
C-5
LINKDEPTH 1 through 255
The value should be less than or equal to
the value of MAXLINKS. If
MAXLINKS is 0, use the LINKDEPTH
default.
1
MAXASSIGNS 4094 (automatically set by PXMCFG) —
MAXDEFINES 4094 (automatically set by PXMCFG) —
MAXEXTERNALTCPS 0 through 800 minus the number of TCP
processes assigned to the PATHMON
process managing service requests.
Recommended value: 0
0
MAXINPUTMSGLEN 0 through 6000 bytes; does not include
message header length
133
MAXINPUTMSGS 0 through 2045 0
MAXLINKMONS 0 through 4095 —
MAXLINKS 0 through 4095 Unlimited number
of links
MAXPATHWAYS 0 through 4095 0
MAXPARAMS 4094 (automatically set by PXMCFG) 0
MAXPXMCOMS 1 through 50 1
MAXREPLY 0 through 32767 bytes 2000
MAXSERVER-
CLASSES
4094 (automatically set by PXMCFG)
Total of MAXSERVERS values for all
server classes must not exceed the value
of MAXSERVERPROCESSES.
—
MAXSERVER-
PROCESSES
4094 (automatically set by PXMCFG) —
MAXSERVERS 0 through 4095 1
MAXSPI 1 through 100 1
MAXSTARTUPS 4094 (automatically set by PXMCFG) —
MAXTELLQUEUE 3 through 300
Recommended value if Compaq
NonStop™ Pathway/iTS is not installed
at your site: 0
4
MAXTELLS 0 through 4095
Recommended value if Pathway/iTS is
not installed at your site: 0
32
Table C-2. Configuration Limits and Defaults (page 4 of 8)
PXMCFG or PXMCOM
Parameter Valid Values and Limits Default Value