Pathway/XM System Management Manual

Configuration Limits and Defaults
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
C-6
MAXTERMDATA If NONSTOP set to 0:
0 through 2147483647 bytes
If NONSTOP set to 1:
2804 through 2147483647 bytes
8000
MAXTMFRESTARTS -1 through 32767 5
MAXWEIGHTS 1 through 32768 32768
MODE ORDERLY | ABORT | IMMEDIATE ORDERLY
NODE One through 15 alphanumeric and
hyphen characters; the first character
must be alphabetic.
—
NODES To support PATHMON processes, there
must be one configured NODE object
per physical system in which TCP
processes are configured.
—
NONSTOP For ROUTERS: ON | OFF
For all else: 0 | 1
OFF
1
NUMSTATIC 0 through 4094
The value must not exceed value of
MAXSERVERS.
0 (all servers are
dynamic)
OWNERID [system-number. | \*.]
group-number,user-number
or
[physical-node. | \*.]
group-name.user-name
Owner ID of user
who started the
PXMCFG process
OUT Name of output file Spaces are passed
for file name
PORT Number of TCP/IP port —
POWERONRECOVERY ON | OFF ON
PRI NODE: 11 through 199
PATHMON: 1 through 199
Process Broker: 1 through 199
LCS: 1 through 199
TCP: 1 through 199
Server process: 1 through 199
The priority of
PXMCFG minus 0
The priority of
PXMCFG minus 1
The priority of
PXMCFG minus 3
The priority of
PXMCFG minus 5
The priority of
PXMCFG minus 10
Table C-2. Configuration Limits and Defaults (page 5 of 8)
PXMCFG or PXMCOM
Parameter Valid Values and Limits Default Value