Pathway/XM System Management Manual

Configuration Limits and Defaults
Compaq NonStop™ Pathway/XM System Management Manual—426761-001
C-8
TERMBUF 256 through value of TERMPOOL
If writing diagnostic display messages to
a terminal: 1315 through value of
TERMPOOL
1500
TERMPOOL Minimum of 25
Use the following formula to determine
the value of TERMPOOL:
TERMPOOL = MAXTERMS ∗ (the
largest value of either TERMBUF or the
largest possible I/O (display, accept, or
message) )
The space allocated for TERMPOOL is
the specified value rounded up to the
next-highest multiple of 4.
10000
TIMEOUT 0 through 16383 SECS, or
0 through 1092 MINS, or
0 through 18 HRS
No timeout; TCP or
server process waits
indefinitely for I/O
operation to com-
plete unless the send
times out during the
I/O because of the
timeout value
specified in the send
call
TMF PROGRAM: ON | OFF
TERM: ON | OFF
SERVER: ON | OFF
ON
ON
OFF
TRAILINGBLANKS ON | OFF ON
Table C-2. Configuration Limits and Defaults (page 7 of 8)
PXMCFG or PXMCOM
Parameter Valid Values and Limits Default Value