PEEK Reference Manual

PEEK Syntax and Examples
PEEK Reference Manual — 529657-006
2 - 13
CME Option
CME Option
This section describes the CME option for the following releases:
CME Option - H06.16/J06.05 and later RVUs
CME Option - For releases before H06.16/J06.05 RVU
Note.
Even if <value > does reach zero, CMEs are always corrected.
For a system running J06.06 or earlier J-series RVUs or H06.17 or earlier H-series RVUs,
NRL is displayed as a four line output with the small-index (S) and medium-index (M)
entries for NRL and PPL on separate lines. This is compressed to a single line NRL output
from H06.18 series and J06.07 series onwards.
For a system running J06.14 and later J-series RVUs or H06.25 and later H-series RVUs,
the enhanced PME table, OSS SHM, and OSS SEM information are included in the
output.
For a system running J06.09 and later J-series RVUs or H06.20 and later H-series RVUs,
the FLEXPOOL64 information is also included in the output.
Figure 2-4. PEEK ALL Listing (for H-series RVUs and J-series
RVUs) (page 3 of 3)
NSAA
REINTEGRATIONSTATUS: NOCUR RENT OPERATION
BLADEA: SUCCES SREINT LASTSUCCREINTTIME
CPU0 0 0:00:00.000
CPU1 0 0:00:00.000
CPU2 0 0:00:00.000
CPU3 0 0:00:00.000
BLADEB: SUCCES SREINT LASTSUCCREINTTIME
CPU0 0 0:00:00.000
CPU1 0 0:00:00.000
CPU2 0 0:00:00.000
CPU3 0 0:00:00.000
BLADEC: SUCCES SREINT LASTSUCCREINTTIME
CPU0 0 0:00:00.000
CPU1 0 0:00:00.000
CPU2 0 0:00:00.000
CPU3 0 0:00:00.000
AVAILABLEFUT URECMEPAGERE MOVA LS: 4,096
VST008.vsd