PEEK Reference Manual

PEEK Syntax and Examples

PEEK Reference Manual — 529657-006

2 - 21

INTERRUPTS Option

CLEANQ: FULLS FRLST:HITS CLOCK:CALLS FAILS CYCLES ALIASES: FAILS

0 0 739234 753 0 1.02 0 0

INTERRUPTS Option

Use the INTERRUPTS option to display counters for interrupt process (IP) and auxillary

process (AP) events. For H-series RVUs and J-series RVUs, interrupt handlers are

replaced by interrupt processes. Interrupt handlers have one or more corresponding

interrupt process. Some interrupt handlers are combined into a single-process general

fault handler (GFH), which handles several kinds of events such as traps, process

timer timeouts, and pending ownership events. Dispatcher is the only interrupt handler

that does not have a corresponding interrupt process.

When you enter PEEK INTERRUPTS, an output similar to this example is generated:

> PEEK INTERRUPTS

PEEK - T9050G09 - (05AUG02) SYSTEM \VIOLET

SYSTEM \VIOLET

22 FEB 2004 , 13:48__ELAPSD 161:38:32__CPU 2(NSR-T)

INTRPTS: DISP BUS HIIO IIO TIME FAULT

41,180,423 46,599,852 0 0 3,982,934 2,284,217

SCHANL CME UCME MAB BKPT OSP PFAIL PON

0 0 0 3 5,589 0 0 0

IFAIL STKOV ARITHOV SAMPLE

100 1 11 0

Note. For a system running J06.06 or earlier J-series RVUs and H06.17 or earlier H-series

RVUs, NRL is displayed as a four-line output with the small-index (S) and medium-index (M)

entries for NRL and PPL on separate lines. This four-line output is compressed to a single line

NRL output from J06.07/H06.18 series onwards.

For a system running J06.14 and later J-series RVUs or H06.25 and later H-series RVUs, the

enhanced PME table, OSS SHM, and OSS SEM in

formation are included in the output.

For a system running J06.09 and later J-series RVUs or H06.20 and later H-series RVUs, the

FLEXPOOL64 info

rmation is also included in the output.