Pocket Viewpoint User Guide, Version 2.0

Pocket ViewPoint User Guide H02 – 545765-002
- 10 -
2 Installation and Configuration
Installation of Pocket ViewPoint can be done either using the Wizard Installation, Manual Installation or
IPSETUP. The Wizard Installation automates most of the install steps but requires Java Run Time on the PC
where the installer is run. Configuration data is collected through user input and then the particular
configuration files of PVP are updated and pushed to the NonStop server. This process greatly simplifies and
streamlines the PVP install process.
2-1 Considerations & Requirements
The user should read the following section before starting the install process to understand the
basic requirements and to make the proper preparations. Network configuration details are needed
in order to complete the install therefore it is important to have this information ready and available
before starting the install process.
 Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this CD) containing the
IPSetup User Guide, which provides instructions for using IPSetup, a utility provided on the CD
that enables installation of Independent Products. You will need Adobe Acrobat Reader to read
or print the IPSetup User Guide. Visit Adobe's website to download the latest Adobe Acrobat
Reader: http://www.adobe.com
 Decide whether you will use DSM/SCM to move files to Installation Subvolumes (ISVs) after
files are placed on the workstation. Using DSM/SCM is optional, but is recommended when
DSM/SCM is available.
2-1-1 Pre- Requisites
2-1-1-1 Hardware
 HP NonStop Server
 Smartphone (non-dedicated).
2-1-1-2 Minimum OS Release:
 NonStop Kernel release H06.10 onward and J06.03 onwards
2-1-1-3 Software
 Smartphone browser with JavaScript and html support
 Web ViewPoint - H01AAX or later
 Java Version 1.5.0_12 or later