POS Transaction Analyzer User and Installation Guide, SST Version 1.2

Appendix J 175
POSRECOVER Configuration Parameters
Section: Data Source Configuration
Parameter Description
Name Name of the database
User Name Name of the database user
Password Database password
Use Credential Enabled Whether credentials are to be used or not
Section: Operational Parameters
Parameter Description
Nonstop Node Name of the NonStop Node
Default: ””
Fraction Time Logging
Enabled
Enable fraction time logging
Default: 1
Use LocalTime Enabled Enable use of local time
Default: 1
Maximum Log File Length
(Kb)
Log File Length size in Kb.
Default: 4
Log File Name Name of the log file.
Default: POSRecovery.log
Validation and Repair
Enabled
Enable validation and repair
Default: 1
Log Repaired Transaction
Enabled
Enable logging of repaired transactions
Default: 1
Enable Customer Data Enable/Disable the insertion of data in the Customer Table in the database.
Default: 0
Customer Data File Name Defines the path of the customer data configuration file.
Default: CustomerMapFile.ini
Log Level Log level settings for problem tracing.
Value: 0
Maximum Number of Log
File
Maximum number of log files.
Default: 5
Inbound Recovery File Path Enable the offline recovery process to place all the recovery files at the specified
path. For example,
InboundRecoveryFilePath: C:\HP SST\RECOVERY\REC*.TXT
Processed File Path Places the successfully recovered files at the specified location. For example,
ProcessedFilePath=C:\HP SST\RECOVERY\MOVED\
Error File Path Places all the files that are not recovered successfully at the specified location. For
example,
ErrorFilePath=C:\HP SST\RECOVERY\ERROR\
Action When Processed Specifies the action performed on the recovery files. The following actions are
performed on the files:
• 1: Move the files to the specified location (PROCESSED / ERROR).
• 2: Delete the files that are successfully recovered or place the files to the
ErrorFilePath which are not successfully recovered.
Max TPS Specifies the maximum TPS maintained to insert data in the POS database.
Default: 100
Recovery Retry Interval(Mins) Specifies the duration in minutes for which the recovery process will wait to restart
the recovery action.
Appendix J