Processor Halt Codes Manual

Effect
The processor halts. The rest of the system is not affected.
Recovery
Contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%000212
Cause
PROMBoot has detected an unrecognized error code.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%000213
Cause
The state flag returned in an I/O interrupt packet’s sense data indicates that there is no sense
data associated where it is expected.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%000214
Cause
The sense key returned in an I/O interrupt packet’s sense data has an error that is neither a
good status nor a recoverable error.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%000215
Cause
The disk being used for the system-load operation is not supported by the processor.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%000216
Cause
The system-load from tape operation failed at the READCAPACITY operation to the disk.
Standard Processor Halt Code Descriptions 111