Processor Halt Codes Manual

Cause
A ServerNet error interrupt occurred because either internal inconsistencies occurred in the kernel
software or inconsistencies occurred between the ServerNet interface hardware and the kernel
software.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%001021
Cause
An internal inconsistency has been detected by the part of the operating system that handles
ServerNet errors.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%001022
Cause
An event management service (EMS) error occurred during power-fail handling.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%001023
Cause
During processor initialization, nonresident system library executable headers could not be
found.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%001024
Cause
Could not recognize load type.
120 Software Halt Code Descriptions