Processor Halt Codes Manual

Effect
The system fails to load. The rest of the system is not affected.
Recovery
With the Subsystem Control Facility (SCF), reconfigure the system terminal name. Retry the
system-load operation. If the error recurs, refer to Processor Halt Monitoring and Recovery
(page 10).
%002021
Cause
An internal error occurred. The monitor process received an unexpected message from the
message system.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%002022
Cause
An internal inconsistency occurred in the monitor process.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%002023
Cause
An internal inconsistency occurred in the monitor process.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%002024
Cause
The physical path to the system-image file as specified in the CONFIG file does not match the
hardware configuration.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Correct the path specification and rerun the system generation process. If the error recurs, refer
to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact your
124 Software Halt Code Descriptions