Processor Halt Codes Manual

Recovery
Add more main memory so that the main memory size equals the minimum number of pages of
memory required. Check the system-generation process output to determine the minimum pages
of memory required for the halted processor. If you need assistance, contact your service provider
or the Global NonStop Solution Center (GNSC), as directed by your local operating procedures.
%003001
Cause
The GETENTRY table contains a bad freelist.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%003002
Cause
A bad entry was returned to the PUTENTRY table.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%003003
Cause
A bad address was supplied to the LOCKMEMORY or UNLOCKMEMORY procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%003004
Cause
An attempt was made to unlock an absent page or to unlock more bytes in a page than were
locked.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%003005
Standard Processor Halt Code Descriptions 127