Processor Halt Codes Manual

Cause
Inconsistent pools in a privileged process were detected during GETPOOL.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%003031
Cause
Inconsistent pools in a privileged process were detected during a call on the PUTPOOL procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%003032
Cause
The segment identification number had a use count other than zero.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
the Tandem NonStop Support Center (TNSC).
%003033
Cause
An error occurred while the memory manager was adjusting a segment use counter.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
the Tandem NonStop Support Center (TNSC).
%003034
Cause
An internal error occurred in the RESIZESEGMENT procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
the Tandem NonStop Support Center (TNSC).
%003035
132 Software Halt Code Descriptions