Processor Halt Codes Manual

Cause
A message system buffer adjustment failed for the RESIZESEGMENT procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
the Tandem NonStop Support Center (TNSC).
%003036
Cause
The memory manager could not find a segment page table (SPT) for the absolute segment.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
the Tandem NonStop Support Center (TNSC).
%003037
Cause
The physical-page table (PHYPAGE) entry does not match the segment page table (SPT).
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
the Tandem NonStop Support Center (TNSC).
%003040
Cause
A memory initialization error occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
the Tandem NonStop Support Center (TNSC).
%003041
Cause
An internal error occurred when a process file segment (PFS) could not be allocated to a process
after it was created.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
the Tandem NonStop Support Center (TNSC).
%003042
Standard Processor Halt Code Descriptions 133