Processor Halt Codes Manual

Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%004103
Cause
An internal error occurred because a running process or the message system tried to send too
much processor information-only (PIO) data.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%004104
Cause
An internal error occurred because a critical call to the LOCKMEMORY procedure was
unsuccessful.
Effect
All freeze-enabled processors halt.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%004105
Cause
An internal error occurred when a low-level consistency check failed.
Effect
All freeze-enabled processors halt.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%004106
Cause
The messenger operating system process in charge of delivering certain types of messages was
unable to allocate a message quick cell (MQC).
Effect
The processor halts. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 149