Processor Halt Codes Manual

Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%004306
Cause
An unsupported packet type was received from the Fiber Optic Extension (FOX) network.
Effect
All freeze-enabled processors halt.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%004310
Cause
An unexpected interface error occurred between the Fiber Optic Extension (FOX) message system
and ServerNet services.
Effect
All freeze-enabled processors halt.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures. .
%004400
Cause
An internal message-system-driver consistency check failed while processing an incoming packet.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%004401
Cause
The message system has asked the message-system driver to pull a buffer of an incorrect size.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%004402
Standard Processor Halt Code Descriptions 153