Processor Halt Codes Manual

Cause
A processor initialization error occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures. This processor cannot be used until the system is coldloaded from a
different SYSnn.
%005017
Cause
The TRAPOUT procedure received an unknown trap number.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005020
Cause
The entry point for TRAPOUT_INPROC_ cannot be found.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005021
Cause
The entry point for FS2_NMI_TRAPHANDLER_ cannot be found.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005022
Cause
A proto-process made an invalid procedure call
Effect
The processor halts. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 161