Processor Halt Codes Manual

Cause
An interrupt handler, an unstoppable process, or a system process experienced an instruction
failure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005102
Cause
An interrupt handler, an unstoppable process, or a system process experienced an arithmetic
overflow.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005103
Cause
An interrupt handler, an unstoppable process, or a system process experienced a stack overflow.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005104
Cause
An interrupt handler, an unstoppable process, or a system process received a process-loop-timer
timeout.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005105
Cause
An unstoppable process that does not support PINs higher than 256 called a procedure that
exceeded the interface limits.
166 Software Halt Code Descriptions