Processor Halt Codes Manual

Cause
An inconsistency has occurred in the Process Time-list Element (PTLE) table.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005204
Cause
An invalid process-timer value was encountered by microcode.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005210
Cause
A DEFINE internal error occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005220
Cause
An internal error occurred while Dynamic System Configuration (DSC) was running.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005221
Cause
While Dynamic System Configuration (DSC) is adding a controller, an error might have occurred
during enlargement of the IOMAP table.
Effect
The processor halts. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 169