Processor Halt Codes Manual

%005227
Cause
The system tried to modify some fields in a register save area, but the mode of the register save
area was incorrect.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005230
Cause
While Dynamic System Configuration (DSC) was running, an error occurred when the Event
Management Service (EMS) templates were being updated.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005231
Cause
An internal error occurred while a Safeguard procedure was being called.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005232
Cause
An attempt was made to set up an incorrect operating-system environment.
Effect
All freeze-enabled processors halt.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005233
Cause
An internal error occurred on a binary semaphore.
Effect
All freeze-enabled processors halt. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 171