Processor Halt Codes Manual

Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005234
Cause
A bad hitlist entry was found during dispatcher initialization.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Take a memory dump, collect the required information, and contact your service provider.
%005300
Cause
A privileged procedure passed an invalid field identifier to a process control block (PCB)
manipulation procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005301
Cause
A privileged procedure passed an invalid length parameter to a process control block (PCB)
manipulation procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005302
Cause
A privileged procedure omitted a required parameter when it was calling a process control
block (PCB) manipulation procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005303
172 Software Halt Code Descriptions