Processor Halt Codes Manual

%005503
Cause
Initialization error for a system process created by OSBUILD.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures. This processor cannot be used until the system is coldloaded from a
different SYSnn.
%005504
Cause
Initialization error for a system process created by OSBUILD.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures. This processor cannot be used until the system is coldloaded from a
different SYSnn.
%005505
Cause
Initialization error for a system process created by OSBUILD.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures. This processor cannot be used until the system is coldloaded from a
different SYSnn.
%005510
Cause
An internal error occurred during a system process initialization.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%005511
Cause
An error occurred during initialization of an internal process.
Standard Processor Halt Code Descriptions 175