Processor Halt Codes Manual

Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%007024
Cause
The Timer IP was blocked for too long.
Effect
The logical processor halts.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump of the halted
processor. Collect the required information and contact your service provider or the Global
NonStop Solution Center (GNSC), as directed by your local operating procedures.
%007301
Cause
An internal procedure could not allocate memory for a control structure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%007302
Cause
In a Triple-Modular Redundancy (TMR) system, all three slices have different memory contents.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%007401
Cause
A request was made to update a non-existing DCT entry.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%007402
Standard Processor Halt Code Descriptions 189