Processor Halt Codes Manual

Cause
Insufficient main memory was available to expand the destination control table (DCT). Either the
processor memory was insufficient for the configuration and application, or a logic error locked
too many pages.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%007410
Cause
An internal error occurred with the destination control table (DCT).
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%007420
Cause
The Destination Control Table has detected internal inconsistencies.
Effect
The logical processor halts.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump of the halted
processor. Collect the required information and contact your service provider or the Global
NonStop Solution Center (GNSC), as directed by your local operating procedures.
%007421
Cause
The Destination Control code invoked with invalid options.
Effect
The logical processor halts.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump of the halted
processor. Collect the required information and contact your service provider or the Global
NonStop Solution Center (GNSC), as directed by your local operating procedures.
%007422
Cause
The Destination Control code invoked with invalid extra options.
Effect
The logical processor halts.
190 Software Halt Code Descriptions