Processor Halt Codes Manual

Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump, contact your
service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%007701
Cause
The amount of virtual memory available is not sufficient to run $ZCNF.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Before attempting a memory dump,
contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%007702
Cause
A logic error occurred with $ZCNF.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Before attempting a memory dump,
contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%007703
Cause
The configuration services product is unable to start the initial command interpreter.
Effect
There is no TACL process; the system is unusable.
Recovery
Retry the system-load operation with a different system-image file. If the problem recurs, load
the system from a previous version of the system-image file, use the NSKCOM utility to increase
the amount of space allocated for kernel-managed swap files, and retry the system-load operation
from the new version of the system-image file. If the problem still persists, refer to Processor Halt
Monitoring and Recovery (page 10). Take a memory dump and contact your service provider
or the Global NonStop Solution Center (GNSC), as directed by your local operating procedures.
For more information about the Kernel-Managed Swap Facility (KMSF) and NSKCOM, refer to
the Kernel-Managed Swap Facility (KMSF) Manual.
%007704
Cause
A checkpointing error occurred with $ZCNF.
Effect
The processor halts. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 195