Processor Halt Codes Manual

Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Before attempting a memory dump,
contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%007705
Cause
The configuration database could not be opened during a system-load operation.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Retry the system-load operation with a different configuration database file. If the operation is
still not successful, refer to Processor Halt Monitoring and Recovery (page 10), take a memory
dump, and contact your service provider or the Global NonStop Solution Center (GNSC), as
directed by your local operating procedures.
%007706
Cause
An internal error occurred in the configuration-services application programming interface (API).
Effect
The processor halts. The rest of the system is not affected.
Recovery
Retry the system-load operation with a different configuration database file. If the operation is
still not successful, refer to Processor Halt Monitoring and Recovery (page 10), take a memory
dump, and contact your service provider or the Global NonStop Solution Center (GNSC), as
directed by your local operating procedures.
%007707
Cause
$ZCNF could not start the System Configuration Database Manager process ($ZCDB) during a
system-load operation.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Before attempting a memory dump,
contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%007710
Cause
The amount of virtual memory available is not enough to run the system configuration database
manager process ($ZCDB).
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Before attempting a memory dump,
contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
196 Software Halt Code Descriptions