Processor Halt Codes Manual

Recovery
Specify all four paths to the coldload volume, even if some paths lead to a missing or uninitialized
disk drive. Uncheck the box in the OSM LLL GUI next to any path that you don't want to coldload
from.
%007773
Cause
A disk that has a user-specified World Wide Name (WWN) is in a different shelf and bay from
the shelf and bay specified by the user.
Effect
The processor halts. Since it's the only processor up during coldload, the system halts.
Recovery
Either do not specify any WWNs, or specify the correct WWNs for the disk in the specified
shelf and bay.
%007774
Cause
The storage subsystem cannot determine which shelf and bay contains the disk identified by the
user-specified World Wide Name (WWN).
Effect
The processor halts. Since it's the only processor up during coldload, the system halts.
Recovery
Specify the shelf and bay but not the WWN, or physically insert the disk so that FCSMON can
detect the shelf and bay of the disk.
%007775
Cause
Any two paths through any type of adapter to the coldload volume are identical, or four paths
to the coldload volume use a total of three different CLIMs.
Effect
The processor halts. Since it's the only processor up during coldload, the system halts.
Recovery
Specify a valid set of four unique paths to the coldload volume.
%007776
Cause
Unable to write or update a CLIM config record used by a path to the coldload volume.
Effect
The processor halts. Since it's the only processor up during coldload, the system halts.
Recovery
When specifying a CLIM location that is not yet in the CONFIG file, specify a CLIM name that
is not already in the CONFIG file and make sure the CLIM is connected to the NonStop system.
When specifying a CLIM location that is already in the CONFIG file, make sure the CONNPTS
of the connected CLIM matches the value in the CONFIG file.
%010001
198 Software Halt Code Descriptions