Processor Halt Codes Manual

Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%012103
Cause
The maintenance I/O process (MIOP) failed to synchronize memory and cache.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%013003
Cause
A Transaction Management Facility (TMF) logic error occurred.
Effect
The processor halts. This halt generates TMF operator message 39; for more information about
this error, refer to the NonStop S-Series Operations Guide or NonStop NS-Series Operations
Guide.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures. If you cannot perform the dump, note the detail code returned by
Transaction Management Facility (TMF) operator message 39 before contacting your service
provider.
%014001
Cause
An internal Measure error occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor and save a copy of the Measure data file that
was taken before the processor halted. Next, collect the required information and contact your
service provider.
%014002
Cause
An internal Measure error occurred because a memory pool inconsistency.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor and save a copy of the Measure data file that
was taken before the processor halted. Next, collect the required information and contact your
service provider.
Standard Processor Halt Code Descriptions 207