Processor Halt Codes Manual

%014003
Cause
An internal Measure error occurred because an internal message ID number was corrupted.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor and save a copy of the Measure data file that
was taken before the processor halted. Next, collect the required information and contact your
service provider.
%014005
Cause
An internal inconsistency occurred between Measure and the magnetic disk process.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor and save a copy of the Measure data file that
was taken before the processor halted. Next, collect the required information and contact your
service provider.
%014006
Cause
An internal Measure error occurred because of an inconsistent internal queue.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor and save a copy of the Measure data file that
was taken before the processor halted. Next, collect the required information and contact your
service provider.
%017000
Cause
An internal inconsistency occurred during the initial building of the ServerNet services structures.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%017001
Cause
The internal ServerNet services structures are not sufficient to handle the current traffic because
resources that are no longer in use have not been deallocated.
Effect
The processor halts. The rest of the system is not affected.
208 Software Halt Code Descriptions