Processor Halt Codes Manual

it recommends for replacement. Contact your service provider or the Global NonStop Solution
Center (GNSC) as directed by your local operating procedures.
%017013 - %017017
Cause
An internal TNet Services error has occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%017020
Cause
A TNet Services client attempted to release an IO buffer with an invalid TNet Address.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%017021
Cause
A TNet Services client attempted an operation with an invalid Device Handle.
Effect
The processor is in a halt state. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%017022
Cause
TNet Services detected an inconsistency between the Model Number and the hardware.
Effect
The processor is in a halt state. The rest of the system is not affected.
Recovery
The OS image is not built or loaded correctly. Please contact your service provider or the Global
NonStop Solution Center (GNSC), as directed by your local operating procedures.
%017023
Cause
A TNet Services Interrupt Process has been invoked with an unknown parameter.
Effect
The processor halts. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 211