Processor Halt Codes Manual

Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%040000
Cause
The PUTPOOL procedure failed to free a local pool buffer. This halt could indicate that there is
a bad boundary tag in a pool buffer or that there was an attempt to free a buffer that was
already free.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%040001
Cause
The GETCSMLDEV procedure failed.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%040100
Cause
An internal error occurred in the Communications Subsystem Manager (CSM).
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%041501
Cause
An error occurred when the service manager was attempting to free a local pool buffer.
Effect
The processor halts. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 213