Processor Halt Codes Manual

Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%047277
Cause
A coding error occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%047400
Cause
No level-3 protocol was configured in SYSGEN.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Run SYSGEN again with level-3 protocol.
%047401
Cause
A memory allocation problem occurred at initialization.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
your Tandem NonStop Support Center (TNSC).
%047402
Cause
An invalid level-2 state existed.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
your Tandem NonStop Support Center (TNSC).
%047403
Cause
An invalid level-3 state existed.
Effect
The processor halts. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 219