Processor Halt Codes Manual

LAP level 2%22
LAPB level 2%23
LAPX level 2%24
Level 3 packet%30
Level 4 Debug%41
Level 4 ITI%42
Level 4 MGR%43
Level 4 NAM%44
Level 4 PMX%45
Level 4 PTP%46
Level 4 QLLC%47
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%047600
Cause
Sufficient control-block pool space in SET^NSCB could not be obtained.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%047601
Cause
Insufficient control-block pool space was available during initialization.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%047602
Cause
A state transition error occurred.
Effect
The processor halts. The rest of the system is not affected.
Standard Processor Halt Code Descriptions 221