Processor Halt Codes Manual

Cause
An input/output (I/O) process supplied an invalid value when calling an I/O process request
manager (IOPRM) procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%060017
Cause
An internal error occurred in the input/output process request manager (IOPRM) during a
checkpoint operation.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%060057
Cause
An input/output (I/O) process attempted an operation that is not permitted while an open request
is outstanding.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%060060
Cause
A backup requester tried to open an input/output (I/O) process before the open request from
the primary requester had arrived.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%060061
Cause
A send request from an input/output (I/O) process could not be abandoned because it had
been queued by the I/O process.
Standard Processor Halt Code Descriptions 229