Processor Halt Codes Manual

Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%060077
Cause
An input/output (I/O) process supplied an invalid checkpoint data size to an I/O process request
manager (IOPRM) procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%061020 through %061040
Cause
An error occurred in the SNAX/XF IOPLIB, a set of library routines used by SNAX/XF.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information, and contact
your Tandem NonStop Support Center (TNSC).
%061041
Cause
An error occurred in a process that was contacting the SNAX/XF IOPLIB.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%061042
Cause
The Open System Service (OSS) File Manager detected an unexpected error in internal logic.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%061043
Standard Processor Halt Code Descriptions 233