Processor Halt Codes Manual

Effect
The processor halts. The rest of the system is not affected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%061050
Cause
The extensible input/output (XIO) monitor process was unable to allocate or initialize its data
structures or was unable to lock its message-system buffers in memory.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information and contact
your service provider.
%061051
Cause
The extensible input/output (XIO) interrupt handler attempted to service an interrupt on a hardware
module that had no configured module-driver procedure.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information and contact
your service provider.
%061052
Cause
The SCSI Interface Monitor (SIFM) received an unrecoverable error.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information and contact
your service provider.
%062000
Cause
An internal inconsistency was detected in Tektonic Software's Titanium product.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Take a memory dump of the affected processor, collect the required information and contact
your service provider.
%070707
Standard Processor Halt Code Descriptions 235