Processor Halt Codes Manual

%100321
Cause
An internal processor error has occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100322
Cause
The processor interface chip (PIC) passed bad data to the system. A hardware error probably
occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Contact your service provider or the Global NonStop Solution Center (GNSC), as directed by
your local operating procedures.
%100323
Cause
An error in the input/output subsystem (IOS) occurred while the millicode was handling a
subchannel error.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100324
Cause
An internal processor error has occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100325
Cause
An internal processor error has occurred.
Effect
The processor halts. The rest of the system is not affected.
26 Millicode Halt Code Descriptions