Processor Halt Codes Manual

Cause
During internal testing (performed by software development), the millicode that was processing
a watch exception was unable to simulate a requested instruction.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100352
Cause
During internal testing (performed by software development), the millicode that was processing
a virtual coherency exception could not find a mapped address in the translation look-aside
buffer (TLB).
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100353
Cause
An uncorrectable memory error occurred.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100363
Cause
The processor has detected a problem with the memory subsystem.
Effect
The processor halts. The rest of the system is not affected.
Recovery
Review the service logs for evidence of memory problems, take the appropriate action based
on the service log review, reload the processor, and contact your service provider or the Global
NonStop Solution Center (GNSC), as directed by your local operating procedures.
%100401
Cause
An unexplained interrupt occurred.
Effect
The processor halts. The rest of the system is not affected.
Millicode Halt Codes 31