Processor Halt Codes Manual

%100414
Cause
A privileged process has tried to execute an unblock INTA call when INTA was already blocked
by a previous call.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100415
Cause
A privileged process has tried to do a masking function (MXON, MXFF, XMSK) while INTA
blocking was in process.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100416
Cause
The PWARN QUEUE has failed an internal consistency check.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100417
Cause
An exception has occurred repeatedly and cannot be resolved.
Effect
The processor halts. The rest of the system is not affected.
Recovery
See Processor Halt Monitoring and Recovery (page 10). After taking a memory dump, contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%100420
Cause
An exception occurred while a privileged process was under block INTA.
Effect
The processor halts. The rest of the system is not affected.
Millicode Halt Codes 33