Processor Halt Codes Manual

Effect
The processor load or tape dump fails; the processor remains halted. The rest of the system is
not affected.
Recovery
Try the processor load or tape dump again. If the problem recurs, contact your service provider
or the Global NonStop Solution Center (GNSC), as directed by your local operating procedures.
%100512
Cause
The processor load timed out waiting for the service processor (SP) to translate ServerNet IDs.
Effect
The processor load or tape dump fails; the processor remains halted. The rest of the system is
not affected.
Recovery
Try the processor load or tape dump again. If the problem recurs, contact your service provider
or the Global NonStop Solution Center (GNSC), as directed by your local operating procedures.
%100513
Cause
An incorrect response was received from the service processor (SP).
Effect
The processor load or tape dump fails; the processor remains halted. The rest of the system is
not affected.
Recovery
Try the processor load or tape dump again. If the problem recurs, contact your service provider
or the Global NonStop Solution Center (GNSC), as directed by your local operating procedures.
%100514
Cause
An incorrect response was received from the service processor (SP) because an incorrect slot
location was specified.
Effect
The processor load or tape dump fails; the processor remains halted. The rest of the system is
not affected.
Recovery
Verify that you have specified the correct slot location for the device that you are trying to access,
and try the processor load or tape dump again. If the problem recurs, contact your service
provider or the Global NonStop Solution Center (GNSC), as directed by your local operating
procedures.
%100515
Cause
An incorrect response was received from the service processor (SP).
Effect
The processor load or tape dump fails; the processor remains halted. The rest of the system is
not affected.
42 Millicode Halt Code Descriptions