Processor Halt Codes Manual

About This Document
This publication describes processor halt codes and millicode halt codes for HP NonStop systems.
Cause, effect, and suggested recovery procedures are included for each code.
Supported Release Version Updates (RVUs)
This manual supports J06.03 and subsequent J-series RVUs, H06.03 and all subsequent H-series
RVUs, and G06.24 and all subsequent G-series RVUs until otherwise indicated in a replacement
publication.
Intended Audience
The reader should have some knowledge of and experience with NonStop server operations.
Document Organization
Table 1 summarizes the contents of this guide.
Table 1 Summary of Contents
This chapter . . .Chapter
Describes the types of processor halts, how they are monitored, and how to
recover from them.
Chapter 1: Overview
Describes processor halt codes generated by the millicode.Chapter 2: Millicode Halt Code
Descriptions
Describes processor halt codes generated by the operating-system software.Chapter 3: Software Halt Code
Descriptions
New and Changed Information
Changes and Additions for Interim Release (523309–023)
• Added halt codes %102221 and %100271.
Changes and Additions for H06.25/J06.14 (523309–022)
• Added halt codes %100270 and %102542.
Changes and Additions for H06.24/J06.13 (523309–021)
• Added halt codes %001700, %001701, %001702 and %102537.
• Modified text of halt codes %102222, %102420, %102510, %102521 and %102522.
Changes and Additions for H06.23/J06.12 (523309–020)
• Added halt code %102777.
• Changed halt code %102521.
• Changed the name of the support center from Global Mission Critical Solution Center (GMCSC)
to Global NonStop Solution Center (GNSC) throughout this manual.
Changes and Additions for Interim Release 523309–019
Added halt codes %005031 and %005032.
Supported Release Version Updates (RVUs) 5