Manualshelf

Processor Halt Codes Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
61626364656667686970
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100731 MICROHALT_BOOT_BTE_PKT
Cause
A Fibre Channel Adapter or NonStop Storage CLIM error has occurred during system load.
Effect
The processor load fails; the processor remains halted.
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100732 MICROHALT_FCBD_ADAPTER_NOT_FOUND
Cause
A Fibre Channel Adapter error has occurred during system load.
Effect
The processor load fails; the processor remains halted.
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100733 MICROHALT_BOOT_ADAPTER_SNET_ERROR
Cause
A Fibre Channel Adapter or NonStop Storage CLIM error has occurred during system load.
Effect
The processor load fails; the processor remains halted.
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100734 MICROHALT_BOOT_ADAPTER_HARDWARE
Cause
A Fibre Channel Adapter or NonStop Storage CLIM error has occurred during system load.
Effect
The processor load fails; the processor remains halted.
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100735 MICROHALT_BOOT_FC_LINK_DOWN
Cause
A Fibre Channel adapter or NonStop Storage CLIM error has occurred during system load.
62 Millicode Halt Code Descriptions