Processor Halt Codes Manual

%100742 MICROHALT_BOOT_USAGE_ERROR
Cause
A Fibre Channel Adapter or NonStop Storage CLIM error has occurred during system load.
Effect
The processor load fails; the processor remains halted.
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100743 MICROHALT_BOOT_INTERNAL_ERROR
Cause
A Fibre Channel Adapter or NonStop Storage CLIM error has occurred during system load.
Effect
The processor load fails; the processor remains halted.
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100744 MICROHALT_BOOT_DATA_UNDERRUN
Cause
A Fibre Channel Adapter or NonStop Storage CLIM error has occurred during system load.
Effect
The processor load fails; the processor remains halted.
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100745 MICROHALT_BOOT_ADAPTER_TNET_TIMEOUT
Cause
Both X and Y ServerNet paths have a problem.
Effect
The processor load fails; the processor remains halted.
Recovery
Check that you specified the correct configuration for load. Then, retry the operation. If the
problem recurs, contact your service provider or the Global NonStop Solution Center (GNSC),
as directed by your local operating procedures.
%100746 MICROHALT_EXT_ADAPTER_NOT_FOUND
Cause
Cannot find an external storage adapter such as the NonStop Storage CLIM.
Effect
The processor load fails; the processor remains halted.
64 Millicode Halt Code Descriptions