Processor Halt Codes Manual

Recovery
Write down the halt code and contact your service provider or the Global NonStop Solution
Center (GNSC), as directed by your local operating procedures.
%102205 MICROHALT_HALT_FLASH_CHECKSUM_ERROR
Cause
The flash checksum is bad. The code and or data in flash may be corrupted.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Write down the halt code and contact your service provider or the Global NonStop Solution
Center (GNSC), as directed by your local operating procedures.
%102206 MICROHALT_PKTTYPE_TOO_OLD
Cause
The version of reload or receivedump that you are using to load or dump the CPU is too old and
is incompatible with this release of HSS millicode.
Effect
The reload or receivedump fails.
Recovery
Use the reload or receivedump corresponding to this release of HSS millicode.
%102207 MICROHALT_PKTTYPE_TOO_NEW
Cause
The version of reload or receivedump that you are using to load or dump the CPU is too new
and is incompatible with this release of HSS millicode.
Effect
The reload or receivedump fails.
Recovery
Use the reload or receivedump corresponding to this release of HSS millicode.
%102210 MICROHALT_UNABLE_TO_GET_TIME
Cause
The processor could not get the time of day from the maintenance entity.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Write down the halt code and contact your service provider or the Global NonStop Solution
Center (GNSC), as directed by your local operating procedures.
%102211 MICROHALT_PAL_CALL_FAILURE
Cause
A call to the PAL (processor abstraction layer) failed.
Effect
The processor halts. The rest of the system is unaffected.
66 Millicode Halt Code Descriptions