Processor Halt Codes Manual

Effect
The processor halts. The rest of the system is unaffected.
Recovery
Write down the halt code and contact your service provider or the Global NonStop Solution
Center (GNSC), as directed by your local operating procedures.
%102301 MICROHALT_BTE_SEQ_ERR_DETECT
Cause
The millicode detected an internal inconsistency.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Write down the halt code and contact your service provider or the Global NonStop Solution
Center (GNSC), as directed by your local operating procedures.
%102302 MICROHALT_BTE_MEM_ACCESS_ERR
Cause
The millicode detected an internal inconsistency.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Write down the halt code and contact your service provider or the Global NonStop Solution
Center (GNSC), as directed by your local operating procedures.
%102303 MICROHALT_BTE_INCOMPLETE_PKT_EXEC
Cause
The millicode detected an internal inconsistency.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Write down the halt code and contact your service provider or the Global NonStop Solution
Center (GNSC), as directed by your local operating procedures.
%102400 MC_FAULT_CANONICAL_LOCK_ERROR
Cause
Millicode detected an error associated with a canonical lock.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102401 MC_FAULT_MXON_FAILED
Cause
Millicode detected a MUTEX lock that is already owned by another process.
70 Millicode Halt Code Descriptions