Processor Halt Codes Manual

%102435 MC_FAULT_NO_SEGMENT
Cause
Millicode detected an attempt to map an invalid memory segment.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102436 MC_FAULT_VHPTFLT
Cause
Millicode detected a VHPT translation fault.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102437 MC_FAULT_ALTITLBFLT
Cause
Millicode detected an alternate instruction TLB fault.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102440 MC_FAULT_ALTDTLBFLT
Cause
Millicode detected an alternate data TLB fault.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102441 MC_FAULT_NESTEDTLBFLT
Cause
Millicode detected a nested TLB fault.
Effect
The processor halts. The rest of the system is unaffected.
H-Series and J-Series Codes 77