Processor Halt Codes Manual

Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102442 MC_FAULT_IKEYMISSFLT
Cause
Millicode detected an instruction key miss fault.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102443 MC_FAULT_DKEYMISSFLT
Cause
Millicode detected a data key miss fault.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102444 MC_FAULT_IACCESSBITFLT
Cause
Millicode detected an instruction access bit fault.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102445 MC_FAULT_DACCESSBITFLT
Cause
Millicode detected a data access bit fault.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102446 MC_FAULT_EXTINT_SPURIOUS
Cause
Millicode detected a fault due to a spurious external interrupt.
78 Millicode Halt Code Descriptions