Processor Halt Codes Manual

Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102465 MC_FAULT_NEED_PAGE
Cause
. Millicode detected a situation where a page fault is needed but cannot yet be handled.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102466 MC_FAULT_AVT_ERR
Cause
Millicode detected an AVT error.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102467 MC_FAULT_BTE_ERR
Cause
Millicode detected a BTE error.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%102470 MC_FAULT_CANT_PASS_LOCK_HOLDER_TO_IB_IP
Cause
Millicode detected an attempt to pass ownership of a process that is holding locks to an instruction
breakpoint interrupt process.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
82 Millicode Halt Code Descriptions