Processor Halt Codes Manual

Cause
Arrived at a VRO who VRO Sequence Number is past the expected signpost.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103421 MC_FAULT_SOFTWARE_RV_FAULT
Cause
Invalid count of interrupt vectors in Rendezvous.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103424 MC_FAULT_LIST_WALK_FAULT
Cause
Problem encountered while walking the list of agreed interrupts.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103425 MC_FAULT_NO_IVRS_TO_SEND
Cause
No interrupts detected when trying to send an Interrupt Rendezvous.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103426 MC_FAULT_MONTANA_2_ERR
Cause
Serious error associated with the Montana ASIC.
Effect
The processor halts. The rest of the system is unaffected.
H-Series and J-Series Codes 93