Processor Halt Codes Manual

Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103427 MC_FAULT_SN_PROBLEM
Cause
Problem with VRO Sequence Number detected at a signpost.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103431 MC_FAULT_BAD_PARAMETER_NEWS
Cause
VRO Sequence Number problem in the list of agreed interrupts, attempting to pass too much
data in SRV or EERV, or invalid IRV symbol.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103432 MC_FAULT_AGREED_LIST_FAULT
Cause
Problem with VRO Sequence Number of current entry in list of agreed interrupts.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103433 MC_FAULT_IVR_VALUE_UNKNOWN
Cause
Received unknown interrupt.
Effect
The processor halts. The rest of the system is unaffected.
Recovery
Refer to Processor Halt Monitoring and Recovery (page 10). Take a memory dump and contact
your service provider or the Global NonStop Solution Center (GNSC), as directed by your local
operating procedures.
%103440 MC_FAULT_SOFTWARE_LIST_FAULT
94 Millicode Halt Code Descriptions